Power-sem IGBT driver PSPC420F-17

Power-sem IGBT driver PSPC420F-17

Main parameters (Ta=25℃)

VS power supply voltage +15 V
Total power of PDC/DC isolated power supply 6 W
IS MAX. Primary current maximum 450 mA
Visol isolation voltage (1 minute. AC) 5 kV
VCES IGBT collector-emitter voltage 1700 V
IoutAV 100 mA average current per channel
IoutPEAK Peak current per channel ±15 A
Qout/pulse output charge per pulse ±10 μC
VG(ON/OFF) Gate voltage +15/-9 V
RGon/off min minimum gate on/off resistance 1.6 Ω
VIT+ input high threshold 12.4 V
VIT-input low threshold 4.5 V
Rin input impedance 33 kΩ
dv/dt voltage change rate 75 kV/μS
td(I/O) signal conversion delay 350 nS
tmd narrow pulse suppression 100 nS
td(err) Fault response delay 110 nS
fSW Max. Maximum frequency 100 kHz
Top Working temperature -40℃ ...+80℃

Features

PSPC 420F-17 is an optical fiber interface
PSPC 420-17 comes standard with 2.54mm DC2 20-pin connector, compatible with 2SP0115T interface
PSPC 420-14 comes standard with 2.54mm DC2 14-pin connector, Semimi-controlled half-bridge adapter board interface
Models with "T" for enabling control interface: one way PWM control; one way enable, compatible with 2SP0115T interface
Provide a variety of interfaces such as DC2-8P, DC2-10P, 5.08mm-5P and so on for individual choice.
●Designed for 600V, 1200V and 1700V full series 17mm two-unit IGBT module
● Optional economical 2DI 615 driver core or high-performance PSHI 0420 driver core
● +15V level control and narrow pulse suppression effectively avoid noise interference
●Positive logic control: the high level (or light) IGBT is turned on; the low level (or extinguished) IGBT is turned off
●Integrated DC/DC isolated power supply, multiple drivers can share a +15V power supply
●Nanocrystalline transformer isolation, insulation voltage up to 5kVac
●Integrated interlock (no for "T" model) and dead zone circuit, the dead zone time can be set freely
●Integrated fault synchronization function, the fault mode can be freely selected (only for PSPC 420-14)
●Dynamic monitoring VCEsat provides short circuit (over current) protection,
●Integrated fault "soft shutdown" (available on PSHI 0420) and overvoltage protection (active clamp)
●Power supply undervoltage protection (<12.5V protection)
●Gate voltage monitoring
●Peak output current ±15A
●Gate drive voltage +15V/-9V
●Maximum working frequency 100kHz
● Surface creepage distance 18mm

Application

●Bridge circuit
●Inverter
●Inverter
●Induction heating
●High power UPS
● APF active filter
●High-power high-frequency switching power supply

What we offer?