Power-sem IGBT driver PSPC423-17D

Power-sem IGBT driver PSPC423-17D

Main parameters (Ta=25℃)*

VS power supply voltage +15 V
PDC/DC isolated power supply total power 4 W
IS MAX. Maximum primary current 330 mA
Visol isolation voltage (1 minute. AC) 5 kV
VCES IGBT collector-emitter voltage 1700 V
IoutAV 80 mA average current per channel
IoutPEAK Peak current per channel ±25 A
Qout/pulse output charge per pulse ±30 μC
VG(ON/OFF) Gate voltage +15/-9 V
RGon/off min minimum gate on/off resistance 1 Ω
VIT+ input high threshold 12.4 V
VIT-input low threshold 4.5 V
Rin input impedance 33 kΩ
dv/dt voltage change rate 75 kV/μS
td(I/O) signal conversion delay 650 nS
tmd narrow pulse suppression 400 nS
td(err) Fault response delay 110 nS
fSW Max. Maximum frequency 50 kHz
Top Working temperature -40℃ ...+80℃

Features

PSPC 423-17 is suitable for two 17mm IGBT module parallel drivers, electrical signal interface;
PSPC 423F-17 is compatible with two 17mm IGBT module parallel drivers and fiber interface;
PSPC 620P-MB adapts to two 17mm IGBT modules in parallel with the main driver, standard distribution signal interface;
PSPC 620P-S17 is compatible with a 17mm IGBT module connected in parallel with the electrical interface.
-The PSPC 620P Series is a multi-module freely parallel drive kit, and the PSPC 620P-S17 sub-board cannot be used independently.
●Designed for parallel application of 600V, 1200V and 1700V 17mm two-unit IGBT modules
●Choose optical fiber control model or electric signal control model
● +15V level control and narrow pulse suppression effectively avoid noise interference
●Positive logic control: the high level (or light) IGBT is turned on; the low level (or extinguished) IGBT is turned off
●Integrated DC/DC isolated power supply, multiple drivers can share a +15V power supply
●Nanocrystalline transformer isolation, insulation voltage up to 5kVac
●Integrated interlock and dead zone circuit, the dead zone time can be set
●Integrated fault synchronization function, the fault mode can be freely selected
●Dynamic monitoring VCEsat provides short circuit (over current) protection
●Integrated fault "soft shutdown" and overvoltage protection (active clamping)
●Power supply undervoltage protection (<12.5V protection)
●Gate voltage monitoring
●Peak output current ±25A
●Gate drive voltage +15V/-9V
●Maximum working frequency 50kHz
● Surface creepage distance 16mm

Application

●Bridge circuit
●Inverter
●Inverter
●Induction heating
●High power UPS
● APF active filter
●High-power high-frequency switching power supply

What we offer?