Power-sem IGBT driver PSPC822-90+F

Power-sem IGBT driver PSPC822-90+F

Fits 90mm PrimePACK™3(+) module Plug and play driver based on driver core design

Main parameters (Ta=25℃)*
VS power supply voltage +15 V
PDC/DC isolated power supply total power 8 W
IS MAX. Primary current max. 550 mA
Visol isolation voltage (1 minute. AC) 5 kV
VCES IGBT collector-emitter voltage 1700 V
IoutAV 150 mA average current per channel
IoutPEAK Peak current per channel ±40 A
Qout/pulse output charge per pulse ±40 μC
VG(ON/OFF) Gate voltage +15/-9 V
RGon/off min minimum gate on/off resistance 0.6 Ω
VIT+ input high threshold 12.4 V
VIT-input low threshold 4.5 V
Rin input impedance 33 kΩ
dv/dt voltage change rate 75 kV/μS
td(I/O) signal conversion delay 350 nS
tmd narrow pulse suppression 100 nS
td(err) Fault response delay 110 nS
fSW Max. Maximum frequency 100 kHz
Top Working temperature -40℃ ...+80℃

Features
PSPC 420-45 adapts to 45mm half-bridge IGBT modules
PSPC 420-62 adapts to 34mm and 62mm half-bridge IGBT modules
PSPC 420F-45 adapts to 45mm half-bridge IGBT module, fiber interface
PSPC 420F-62 is suitable for 34mm and 62mm half-bridge IGBT modules, optical fiber interface
PSPC 420-62L adapts various modules through gate plates to simplify the design of DC busbars
●Designed for 600V, 1200V and 1700V 62mm IGBT modules
● Optional economical 2DI 615 driver core or high-performance PSHI 0420 driver core
● +15V level control and narrow pulse suppression effectively avoid noise interference
●Positive logic control: the high level (or light) IGBT is turned on; the low level (or extinguished) IGBT is turned off
●Integrated DC/DC isolated power supply, multiple drivers can share a +15V power supply
●Nanocrystalline transformer isolation, insulation voltage up to 5kVac
●Integrated interlock and dead zone circuit, the dead zone time can be set
●Integrated fault synchronization function, the fault mode can be freely selected
●Dynamic monitoring VCEsat provides short circuit (over current) protection
●Integrated fault "soft shutdown" (available on PSHI 0420) and overvoltage protection (active clamp)
●Power supply undervoltage protection (<12.5V protection)
●Gate voltage monitoring
●Peak output current ±15A
●Gate drive voltage +15V/-9V
●Maximum working frequency 100kHz
● Surface creepage distance 18mm

Application
●Bridge circuit
●Inverter
●Inverter
●Induction heating
●High power UPS
● APF active filter
●High-power high-frequency switching power supply

What we offer?